Mazda3 Key Replacement in San Diego

A Mazda3 from 2014 on starts with a button and takes a $249 fob. Before that, most 2010 to 2013 cars turn a $175 flip key and 2004 to 2009 cars a $135 chip key.

The Mazda3 has run four generations in the US, and the key changed with them: a turned blade key on most cars through 2013, then a push-button smart key on every trim from 2014 on, going by trim listings.

Part of the dealer's number is the service department billing programming as labor, anywhere from $100 to $180, and a Mazda3 with no working key gets a $125 to $200 tow before anyone looks at it. Our fobs come direct from the supplier, the blade is cut on a machine in our locksmith van, and programming runs from the car's diagnostic socket at the curb. See how we keep the price down; the fob and its programming carry a one-year warranty.

Mazda3 keys by model year

Mazda3 keys for 2004 to 2026: 3 key types (chip key, remote key and smart key), $135 to $249 at your car against $245 to $480 at a Mazda dealer. Find your year in the table.

Prices as of 2026-09-30. Every price includes the drive to you anywhere in San Diego County. There is no trip fee and no after-hours rate inside our open hours. All keys lost adds $60.
Model yearsTypical dealerValue Car KeysYou keep
2004 to 2009: Transponder chip keyFirst generation. Many came with a plain MAZ24 edge-cut key carrying a 4D63 chip, and the lock remote as a separate fob. Your VIN settles which key yours takes. $245 $135 $110
2004 to 2009: Remote head key (Some later cars)A flip key in place of the chip key. $320 $175 $145
2010 to 2013: Remote head key (Flip key on most trims)Second generation. The flip key has four buttons, trunk release included, with the blade folding into the head. We cut the blade, code the chip and link the buttons in one visit, then try the trunk button before we go. $320 $175 $145
2010 to 2013: Smart key for push-to-start (Cars with keyless start) $480 $249 $231
2014 to 2018: Smart key for push-to-start (Start button on every trim; hands-free door unlocking only higher up the range)Third generation. Even the base car starts with a button, though its doors open from the fob's buttons. Many 2016 and newer cars hold the programmer in a timed security lockout for several minutes, which lengthens the visit, not the bill. $480 $249 $231
2019 to 2026: Smart key for push-to-start (Start button across the range)Fourth generation, sedan and hatchback. Mazda moved it to the fob family later used on the CX-30 and CX-50, so a 2014 to 2018 Mazda3 fob is not a substitute. Base trims unlock from the fob; higher trims open hands-free. $480 $249 $231
New Mazda3 remote head key next to the worn original at the open rear hatch
The new key next to the original.

Lost every Mazda3 key?

No key at all is a VIN job on any Mazda3. For a 2004 to 2013 car we cut the blade to the key code and write the chip to the immobilizer over the OBD port: $195 for a plain chip key, $235 for a flip key.

A 2014 or newer car gets a new fob with its emergency blade cut, programmed after the security lockout where the car runs one, for $309.

Ownership has to be shown before we start: a title or registration card with your name on it, and an ID that matches. Once the replacement is running the engine, the missing one is erased from the immobilizer without charge, and a fob lost on the sand at Mission Beach becomes useless to whoever picks it up.

Mazda3 key questions

What does a replacement key for a 2014 or newer Mazda3 cost?

It is $249 at your car for the push-button fob, emergency blade cut and programming done. A San Diego Mazda service department usually lands near $480 for that fob once labor is added, before tax. If no key is left, the add is $60, making it $309. The price includes the drive, and the fob and programming carry a one-year warranty.

Will a fob from a 2016 Mazda3 work on a 2020 Mazda3?

No. The fourth-generation Mazda3 that arrived for 2019 uses a newer fob family than the 2014 to 2018 car, and one will not stand in for the other. The 2019 and newer car shares its family with the CX-30 and CX-50 instead, while the 2014 to 2018 fob follows the design the CX-5 introduced. With the VIN in hand, we bring the matching fob, programmed at the car for $249.

My 2012 Mazda3 starts without turning a key. Which key does it need?

A smart key, $249 at the car. Some 2010 to 2013 Mazda3 trims came with keyless entry and start, while the rest kept the four-button flip key at $175. If you start the engine without putting a blade in a slot, your car has the fob system. Your VIN confirms it before we set out.

My older Mazda3 has a plain key and a separate remote. Do I need both replaced?

Only the part you lost. On a first-generation car set up this way, the chip key starts the engine and the remote only works the locks. A chip key is $135 at the car, against about $245 at a dealer. Pairing a remote you have in hand costs $79 to $119, and we quote a new remote when you call.

Should I add a spare Mazda3 fob while I still have one?

Yes, because the spare costs less than the rescue. A second fob for a 2014 or newer Mazda3 is $249 while a working key exists, programmed alongside yours. Once the last fob is gone, the same car costs $309, needs proof of ownership and sits until we arrive. The spare car key page covers the details.

Text us your Mazda3 year and trim

Call or text Value Car Keys at (619) 340-1518 with the car's year, make and model, from anywhere in San Diego County. If a dealer already quoted you, send that quote over for our answer on the same key.

Call (619) 340-1518Text us your car
Call me back

Every day, 7:00 AM to 9:00 PM.

Call (619) 340-1518Text us